
The number of holes tells you what the tap can do. A 3-hole bath tap has hot and cold controls plus a hand shower, so you need a separate way to fill the bath. A 4-hole bath tap adds a bath spout and a diverter, so one set fills the bath and operates the hand shower. Both are mounted on the bath rim or a tiled ledge.
What is a bath rim tap?
A bath rim tap is installed on the rim of the bath or on a tiled ledge beside it, rather than on the wall. Each part of the tap has its own hole, so the components are separate. This creates a clean, spacious look.
What does a 3-hole bath tap include?
A 3-hole bath tap has two control knobs and a hand shower:
-
a knob for hot water
-
a knob for cold water
-
a hand shower for rinsing and cleaning
There is no fixed spout. To fill the bath, you need a separate bath filler, such as one combined with the overflow or a separate spout.
The Aquanello Eterna 3-hole bath tap with hand shower has two round control knobs and a slim hand shower. It is made of stainless steel and fits on a bath rim or tiled ledge.
What does a 4-hole bath tap include?
A 4-hole bath tap is a complete bath rim solution:
-
a knob for temperature and water flow
-
a diverter to switch between the spout and the hand shower
-
a bath spout to fill the bath
-
a hand shower
The Aquanello Eterna 4-hole bath tap with hand shower has a round spout with a reach of approximately 20 cm and a slim, wand-style hand shower. The spout sits approximately 17 cm above the rim.
Which should I choose?
|
3-hole |
4-hole |
|
|
Controls |
Hot and cold |
One knob plus diverter |
|
Bath spout |
No, a separate filler is needed |
Yes |
|
Hand shower |
Yes |
Yes |
|
Best for |
Baths with a separate filler |
A complete bath rim set |
Choose a 3-hole tap if…
your bath already has a filler, for example one built into the overflow, or if you want a very minimalist rim with just two knobs and a hand shower.
Choose a 4-hole tap if…
you want everything in one set: filling the bath, rinsing and switching between the two, without extra components.
What should I check before ordering?
-
Space on the rim. The bath rim or tiled ledge must be wide enough for all the holes.
-
Hole positions. Plan where each component will go so the spout reaches into the bath and the knobs are easy to reach.
-
How you will fill the bath. With a 3-hole tap, make sure you have a separate filler.
-
The material. Check whether holes can be made in your bath or ledge, and leave this to your installer.
Both taps belong to the Aquanello Eterna series and are available in stainless steel, matt black, gold and copper.
What are the most common mistakes?
-
Ordering a 3-hole tap and forgetting the bath filler
-
Not checking whether the rim is wide enough for all the holes
-
Placing the knobs where you cannot reach them from the bath
-
Drilling holes before the bath is installed and level
Every hole has a purpose
Count what you need: controls, a spout, a diverter and a hand shower. The right number of holes will follow.
FAQ
What is the difference between a 3-hole and a 4-hole bath tap?
A 3-hole tap has hot and cold controls and a hand shower. A 4-hole tap adds a bath spout and a diverter.
Does the Aquanello Eterna 3-hole bath tap have a spout?
No. You need a separate bath filler to fill the bath.
What does the diverter on a 4-hole bath tap do?
It directs the water to the bath spout or the hand shower.
Where is a bath rim tap installed?
On the bath rim or on a tiled ledge next to the bath.
What finishes are available?
Stainless steel, matt black, gold and copper.

